HM89249/HM89210 TIMKEN

Brand - TIMKEN
Item Number - HM89249/HM89210 TIMKEN
Also Known As - HM89249 - HM89210
Category - Single Row Tapered Roller Bearing (TS Type)
Bore Diameter (d) mm - 36.512
Bore Diameter (d) inch - 1.4375
Outer Diameter (D) mm - 79.375
Outer Diameter (D) inch - 3.125
Width (T) mm - 29.37
Width (T) inch - 1.1563
Dynamic Load Rating (C1) N - 126000
Dynamic Load Rating (C1) lbf - 28200
Factor (e) - 0.55
Factor (Y) - 1.1
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) N - 32600
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) lbf - 7320
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) N - 30400
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) lbf - 6840
Ratio of Basic Dynamic Radial Load Rating to Basic Dynamic Thrust Rating (K) - 1.07
Basic Static Radial Load Rating (C0) N - 121000
Basic Static Radial Load Rating (C0) lbf - 27200
Cone Width (B) mm - 28.829
Cone Width (B) inch - 1.135
Cup Width (C) mm - 22.664
Cup Width (C) inch - 0.8923
Effective Center Location (a) mm - -5.8
Effective Center Location (a) inch - -0.23
Maximum Shaft Fillet Radius (R) mm - 3.5
Maximum Shaft Fillet Radius (R) inch - 0.14
Cone Frontface Backing Diameter (da) mm - 44
Cone Frontface Backing Diameter (da) inch - 1.73
Cone Backface Backing Diameter (db) mm - 55
Cone Backface Backing Diameter (db) inch - 2.17
Max Housing Fillet Radius (r) mm - 3.3
Max Housing Fillet Radius (r) inch - 0.13
Cup Frontface Backing Diameter (Da) mm - 75
Cup Frontface Backing Diameter (Da) inch - 2.95
Cup Backface Backing Diameter (Db) mm - 66
Cup Backface Backing Diameter (Db) inch - 2.6
Cage-Cone Backface Clearance (Aa) mm - 2.3
Cage-Cone Backface Clearance (Aa) inch - 0.09
Cage-Cone Frontface Clearance (Ab) mm - 2.6
Cage-Cone Frontface Clearance (Ab) inch - 0.1
Geometry Factor (G1) - 27
Geometry Factor (G2) - 11.1
Geometry Factor (Cg) - 0.0861
Weight (kg) - 0.7
Weight (lbs) - 1.53
Inner Part Number - HM89249
Outer Part Number - HM89210
TS - Single Row Tapered Roller Bearing

** Images are for representation purposes only