L812147/L812111 TIMKEN

Brand - TIMKEN
Item Number - L812147/L812111 TIMKEN
Also Known As - L812147 - L812111
Category - Single Row Tapered Roller Bearing (TS Type)
Bore Diameter (d) mm - 66.675
Bore Diameter (d) inch - 2.625
Outer Diameter (D) mm - 103.213
Outer Diameter (D) inch - 4.0635
Width (T) mm - 17.247
Width (T) inch - 0.679
Dynamic Load Rating (C1) N - 82900
Dynamic Load Rating (C1) lbf - 18600
Factor (e) - 0.49
Factor (Y) - 1.23
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) N - 21500
Basic Dynamic Radial Load Rating (90 Million Revolution) (C90) lbf - 4830
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) N - 17900
Basic Dynamic Thrust Load Rating (90 Million Revolution) (Ca90) lbf - 4030
Ratio of Basic Dynamic Radial Load Rating to Basic Dynamic Thrust Rating (K) - 1.2
Basic Static Radial Load Rating (C0) N - 89100
Basic Static Radial Load Rating (C0) lbf - 20000
Cone Width (B) mm - 17.247
Cone Width (B) inch - 0.679
Cup Width (C) mm - 11.989
Cup Width (C) inch - 0.472
Effective Center Location (a) mm - 4.1
Effective Center Location (a) inch - 0.16
Maximum Shaft Fillet Radius (R) mm - 1.5
Maximum Shaft Fillet Radius (R) inch - 0.06
Cone Frontface Backing Diameter (da) mm - 72
Cone Frontface Backing Diameter (da) inch - 2.83
Cone Backface Backing Diameter (db) mm - 75
Cone Backface Backing Diameter (db) inch - 2.95
Max Housing Fillet Radius (r) mm - 0.8
Max Housing Fillet Radius (r) inch - 0.03
Cup Frontface Backing Diameter (Da) mm - 99
Cup Frontface Backing Diameter (Da) inch - 3.9
Cup Backface Backing Diameter (Db) mm - 96
Cup Backface Backing Diameter (Db) inch - 3.78
Cage-Cone Backface Clearance (Aa) mm - 1.2
Cage-Cone Backface Clearance (Aa) inch - 0.04
Cage-Cone Frontface Clearance (Ab) mm - 1.5
Cage-Cone Frontface Clearance (Ab) inch - 0.06
Geometry Factor (G1) - 43.5
Geometry Factor (G2) - 29.9
Geometry Factor (Cg) - 0.0958
Weight (kg) - 0.5
Weight (lbs) - 1.1
Inner Part Number - L812147
Outer Part Number - L812111
TS - Single Row Tapered Roller Bearing

** Images are for representation purposes only